Westinghouse WPac8000s Manual Del Usuario página 16

OPERATION
FAN Button ( )
Press the FAN button ( ) to cycle between fan speeds
in cool, fan, and smart mode. The Fan Speed icons will
appear in the remote display.
LOW
UNIT CHANGE Button (°C/°F)
Use the UNIT CHANGE button (°C/°F) to toggle between
Fahrenheit and Celsius.
MODE Button ( )
Press the MODE button ( ) to cycle between Cool, Dry
and Fan modes. Refer to the instructions in the previous
section for information on the Cool, Fan, Dry, and Smart
Modes.
COOL DRY
SWING Button ( )
Press the SWING button ( ) to make the louvers move
up and down automatically. Press the SWING button ( )
again to stop the movement of the louvers. The Swing Icon
will appear in the remote display.
FUNCTION Button ( )
Use the FUNCTION button to select the Turbo Function or
the Follow Me Function.
FIG. 25
A - Cooling Icon
B - Dry Icon
C - Fan Icon
D - Smart Icon
E - Temperature Unit
F - Child Lock Icon
G - Swing Icon
H - Follow Me Icon
I - Turbo Icon
J - Fan Speed Icons (High, Low, Auto)
K - Sleep Icon
L - Timer OFF Icon
L - Timer ON Icon
16 | English
HIGH AUTO
FAN SMART
A
B
H
Turbo Function
When the Turbo Function is activated,
the temperature setting defaults to
64℉ (18℃) and the fan speed is set
to high. To activate the Turbo Function:
• Press the FUNCTION button ( ) and wait for the
turbo icon to flash in the remote display.
• Press the FUNCTION button ( ) again to activate
the Turbo Function. The turbo icon will stop flashing
and remain in the remote display.
• To deactivate the Turbo Function, press the MODE
button ( ) or the Up ( ) or Down ( ) button.
Follow Me Function
When the Follow Me Function is activated, the remote
control will sense the temperature at its location and send
that information back to the appliance. Once the signal
is recieved, the temperature setting on the appliance
will automatically adjust to match the temperature at the
remote's location. To activate the Follow Me Function:
• Press the
( ), then press either the Up
( ) or Down ( ) button until the
Follow Me icon flashes on the re-
mote control.
• Press the FUNCTION button ( ) again to activate
the Follow Me Function. The Follow Me icon will stop
flashing and remain in the remote display.
C
K
L
M
FUNCTION button
D
J
I
E
F
H