Publicidad
Idiomas disponibles
Idiomas disponibles
2.4. Changing the light
Any repair or maintenance of LED bulbs must be carried out by the
manufacturer, its technical service or another equally qualified technical
professional. Light source in this product is replaceable only by qualified
engineers.
3. Take down the lamp
2.5 Starting to use
2.6 Energy saving tips
The appliance should be located in the coolest area of the room, away from
•
heat producing appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance.
•
Overloading the appliance forces the compressor to run longer. Foods that
freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in
•
the appliance. This cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or
•
paper toweling. Liners interfere with cold air circulation, making the appliance
less efficient.
Organize and label food to reduce door openings and extended searches.
•
Remove as many items as needed at one time, and close the door as soon as
possible.
1. Please take out
the plug before
removal.
panel.
Before initial start, keep the refrigerator still for half an
hour before connecting it to power supply.
Before putting any fresh or frozen foods, the refrigerator
shall have run for 2-3 hours, or for above 4 hours in
summer when the ambient temperature is high.
Spare enough space for convenient opening of the
doors and drawers or statement by the distributor.
2. Remove the lampshade
with a screwdriver.
4. Remove the connection
terminal.
11
V.1
Publicidad
