Publicidad
Idiomas disponibles
Idiomas disponibles
4.3 Cleaning the glass shelf
As the back of the refrigerator that contacts the shelf has a stop, the shelf must first be
lifted out before it can be removed.
Adjust and clean the shelves as needed.
4.6 Defrosting
The refrigerator is designed on an air-cooling principle and therefore has an automatic
defrosting function. If some frost forms due to seasonal or temperature changes, it can
be removed manually by disconnecting the appliance from the power supply or with a
dry cloth.
4.7 Prolonged periods of disuse
Power failure: In the event of a power failure, the food inside the appliance can
be preserved for several hours, even in summer. During a power failure, reduce
the opening times of the door and do not put any more food in the refrigerator.
If the appliance is not to be used for a long time: The appliance should be unplugged
and then cleaned and the doors should be left open to prevent odours from forming.
Moving: Before moving the refrigerator, remove all objects inside, tape down the glass
shelves, vegetable drawer, freezer drawers, etc., and tighten the levelling feet.
Close the doors and secure them with adhesive tape. When moving the appliance,
it must not be placed upside down or horizontally, and any jolting must be
avoided. The inclination during movement must not exceed 45°.
The appliance shall run continuously once it is started. Generally, the
operation of the appliance shall not be interrupted, otherwise the service
life may be impaired.
backstop
raise the glass shelf upwards,
then pull it out
(The picture is only for reference. The actual
configuration will depend on the physical
product or statement by the distributor.)
17
V.1
Publicidad
