HP LaserJet Pro 4001dwe Guía De Configuración página 4

2
Connect printer
to network
hpsmart.com/setup
i.
Go to hpsmart.com/setup on a computer to set up the new printer with
EN
HP Easy Start software.
ii.
Follow the prompts to connect the printer to the network. Choose one of the
options below:
Note: If the software cannot locate the printer on the network, enter the printer's IP
address manually in the software. With hpsmart.com/setup on the printer screen,
press OK. The IP address displays on the printer screen.
iii.
Continue with the steps in the software to add the printer to the network.
4
Connectez l'imprimante
au réseau
Do not use a USB cable for setup. See Reference Guide for
EN
more information.
N'utilisez pas de câble USB pour la configuration. Consultez
FR
le Guide de référence pour plus d'informations.
No emplee un cable USB para la configuración. Consulte la
ES
Guía de referencia para obtener más información.
Use an Ethernet cable to connect the printer to the
Ethernet
same network as the computer.
Make sure the computer Wi-Fi is turned on and in range of the
Wi-Fi printer during setup. Connect the printer to the same network
as the computer.
Conecte la impresora a
la red