Kingfisher FPHPC100 Manual De Instrucciones página 17

Before you start
Turbo jet
The high pressure turbo nozzle is intended for maximum cleaning effect. Keep
the spray wand 15 - 20 cm away from the cleaning surface at all times.
Connection to the water supply
WARNING! Although this product is suitable for attachment to the
drinking water supply local regulations may prohibit the connection to
drinking water connections!
Observe the regulations of your local utility company when connecting
the product to a water supply line! If it is prohibited to connect to the
corresponds to EN 12729 Type BA or EN 61770! Make sure that the
hose is at least a diameter of 13 mm (1/2") and is re inforced!
> Remove the cap (11a) from the water inlet(11) (Fig. 11).
> Screw the water hose connector (12) onto the water inlet (11) (Fig.12).
11
11a
NOTE:
> Attach a suitable water hose (not
included) to the water supply and
then the other end to the water hose
connector (12) (Fig. 13).
> Open the water supply.
Fig. 11
11
12
Fig. 12
12
Ø13 мм
Fig. 13
FPHPC100 GB
IE
17
17
17