Operation
Switching on/off
> Turn the on/off switch (6) clockwiseto its on position ("I") to switch the product
on (Fig. 17).
> Turn the on/off switch (6)anti-clockwiseto its off position (" O ") to switch the
product off (Fig. 18).
Operation
WARNING! Do not operate the product with a closed water tap! This
leads to dry running and subsequently damage the product!
Kickback forces result from pressing the trigger! Therefore, always
hold the spray gun with both hands!
Pay attention to safe posture! Improper handling can lead to injuries!
> Connect the product to power and water supply as described.
> Open the water supply.
> Hold the spray gun (2) with both hands on
the handle (4).
> Direct the nozzle of the chosen accessory
away from yourself towards the surface to
be cleaned (Fig. 19).
> Unlock the trigger (2c) and press it until a
nozzle, to allow air trapped in the hose to
escape.
> Release the trigger (2c) and switch the product on.
> Hold the spray gun (2) with both hands on the handle (4). Direct the water jet
to the object to be cleaned and press the trigger (2c).
Fig. 17
FPHPC100
Fig. 18
Fig. 19
GB
GB
IE
IE
23
23
23