Kingfisher FPHPC100 Manual De Instrucciones página 25

Operation / Care and maintenance
Cars, boats, and motorcycles
> Clean one side at a time to achieve the best results.
> Rinse at high pressure using fan spray in a sweeping motion keeping the
nozzle at least 20 cm from the cleaning surface. Maintain a further distance
from the cleaning area when using jet spray.
>
> Do not clean the engine with this product!
After use
> Release the trigger (2c) and lock it.
> Turn the on/off switch (6) to its off position "O".
> Turn off the water tap.
> Unlock and press the trigger (2c) to release the pressure still present in the
product.
WARNING! Only separate the high-pressure hose from the spray gun
and the water hose from the product when no more pressure exists in
the system! Also ensure that the product is turned off and separated
from power supply!
> Lock the trigger (2b).
> Disconnect the product from the power supply.
> Separate the water hose from the water supply and then from the water hose
connection (12).
> Wind the pressure hose (3) onto the hose holder (5). Ensure that the hose is
not bent or twisted but winded up evenly.
> Dismantle the accessories in the reverse sequence of the assembly instructions
if you are not going to use this product for a long period of time.
> Check, clean and store the product as described below.
The golden rules for care
WARNING! Always switch the product off, disconnect it from the water-
and power supply and let the product cool down before performing
inspection, maintenance and cleaning work!
> Keep the product clean. Remove debris from it after each use and before
storage.
FPHPC100 GB GB
IE
IE
25
25
25