Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Factory settings:
allows
for resetting the facto-
ry settings of the SIME
SMART PLUS
device.
FACTORY RESET
Reset
14:32
Confirm operation?
Confirm
TECHICIAN
Confirm request
14:32
Confirm operation?
Confirm
RESET ALARM HISTORY
Confirm request
14:32
Confirm operation?
Confirm
Colors
14:32
White
Black
Backlight
12:12
5
MIN
access to this menu is protected by an access code and is only allowed for
Technician:
Unauthorised modification of the parameters can jeopardise the boiler's operation.
Access code request
14:32
Code
0 0 0 0 0
FACTORY RESET HISTORY
Confirm request
14:32
Confirm operation?
Confirm
Backlight reduction
80
Sensor
Sensor
22.0 °C
- 0.1°C
Techician
13:54
Hot water
[...]
Boiler parameters
[...]
Activation request delay
120s
Reset alarm history
[...]
Total factory reset
[...]
Brightness in stand-by mode:
12:12
after the set time, the display
will decrease the brightness of
the selected value (setting 100
will cause the display to switch
off entirely).
Sensor calibration:
the room tem-
12:12
perature sensor can be calibrat-
ed to make it more accurate in
relation to the installation site.
In case of positioning the power
supply in the back of the junction
box , it is recommended to cali-
brate the room temperature sen-
sor, setting the value at -2 °C.
qualified technical personnel
Hot water
Enable Anti-Legio
Intervention day
Intervention time
Hot water: it is possible to enable
and set the ANTI-LEGIONELLA
FUNCTION which runs a disinfec-
tion cycle through a weekly ther-
mal shock (the day and time can
be set).
Enable it
if a domestic hot
ONLY
water storage tank is present.
.
15:19
Yes
Mon
02:00
39
Publicidad
