Publicidad
Idiomas disponibles
Idiomas disponibles
Bluetooth
When the device has paired, the LED turns off
®
wireless
in both earbuds.
pairing
Low battery
You will hear the voice prompt "Low battery."
3. Basic operation
3.1. Charging the case and earbuds
1. To charge the case, plug the supplied USB
cable into a power source and the Type C
end in the case's charging port. The case
starts charging automatically.
2. Charging the case battery to its full capacity
may take about 1.5 hour.
3. Once the fourth LED indicator is solid blue,
the charging case is fully charged.
4. Unplug the case from the power source and
place the earbuds on the sockets of the
charging case.
5. While the earbuds are being charged, the
LED indicator lights up red on both earbuds.
When fully charged, the LED indicator turns
off. This process normally takes about 2
hours. Meanwhile, the charging case lights up
indicating the remaining capacity of the
battery.
6. The fully charged earbuds have around 3
hours of battery runtime at 50% volume or
about 80 hours of standby time. However,
these times may vary depending on the
mobile device used, the usage profile, and
the type of files being played.
7. A low battery prompt will be heard to let
you know that the battery is below the
acceptable level to continue operating
properly.
3.2. Turning your earbuds on or o
1. Move the earbuds from the charging case or
press and hold the multifunction button on
each one for about 4 seconds. The
"powered on" prompt will be heard and
the LED in both earbuds will start blinking
red and blue.
2. As both earbuds synchronize, a prompt will
be heard indicating that they are connected.
3. To turn the earbuds off, put them back in
the charging case. Or press and hold the
multifunction button on both earbuds for
about 4 seconds. The "powered off"
prompt will be heard, and the LED indicator
in the earbuds will briefly blink red when
turning off.
Publicidad
