HAMPTON BAY 92380 Guía De Uso Y Cuidado página 10

Assembly - Hanging the Fan (continued)
4
Wiring the receiver to the
household wiring
WARNING: To avoid possible electrical shock, turn
the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
WARNING: Each wire nut supplied with this fan is
designed to accept up to one 12-gauge house wire
and two wires from the fan. If you have larger than
12-gauge house wiring or more than one house wire to
connect to the fan wiring, consult an electrician for the
proper size wire nuts to use.
IMPORTANT: Use the wire connecting nuts (BB)
supplied with your fan. Secure the connectors with
electrical tape and ensure there are no loose strands or
connections.
□
Spread the wires apart so that the green and white wires
are on one side of the outlet box and the black wire is on the
other side.
□
Connect the green fan wires and receiver wires to the
household ground wire (this may be a green or bare wire)
using a wire connecting nut (BB).
□
Connect the receiver (I) black (or red) wire to the household
black (hot) wire using a wire connecting nut (BB).
□
Connect the receiver (I) white wire to the household white
wire (neutral) using a wire connecting nut (BB).
□
Secure each wire connecting nut using electrical tape.
5
Wiring the fan to the receiver
NOTE: The fan comes with 8 in. lead wires for use with
the provided 6 in. ball/downrod assembly (B). If you wish
to use a longer downrod, attach the 3-pin extension wire
(K) and 2-pin extension wire (L) to the fan by connecting
the molded adaptor plugs from the extension wires to
the 3-pin and 2-pin adaptor plugs from the fan.
□
If using the 6 in. ball downrod assembly (B) provided, wire the
receiver to the fan wires by connecting the molded adaptor
plug from the receiver (I) with the molded adaptor of the fan
motor assembly (E) together.
□
If you wish to use longer downrod, you can use the extension
lead wire (42 in.) (K) and (L) provided by connecting the
molded adaptor together.
Black
Receiver
Antenna
BB
Black
White
Receiver
I
Antenna
10
Outlet Box
Green (or Bare)
Black
White
Green
Green
I
Outlet box
Green
BB (x3)
K
L