IKEA VAPPEBY Manual De Instrucciones página 9

Getting started
Connect the charging dock to a wall outlet and place the speaker
in the charging dock (1) for charging your product before the first
use and whenever the LED is blinking red to indicate low battery.
When charging, the LED will remain red if the speaker is off, and
turn off when the battery is fully charged.
Lamp functions
Turning ON/OFF. Press the Lamp switch (4) once to turn it
on the disco light function. The light will pulse in different
colours when music is played from the speaker. Press the
Lamp switch a second time to switch the light to night light
mode,and a third time to TURN OFF.
Speaker functions
Turning ON/OFF.
Press and hold the Power button (3) to turn ON and OFF
your speaker.
Skip. A short press on the Power button will skip to next
song.
Play/Pause. Press the dial (2) to play or pause music.
Volume. Rotate the dial (2) clockwise to increase volume
and anti-clockwise to reduce volume.
Auto-off. If the speaker is not paired to any device, it will turn off
automatically after 5 minutes. In case the speaker is paired but no
music is playing, it will turn off automatically after 20 minutes.
Bluetooth Pairing
To pair your speaker to a source device, the speaker will have to be
in Bluetooth pairing mode. To pair, open Bluetooth setting on your
source device and connect to "VAPPEBY Peanut".
The speaker will enter Bluetooth pairing mode automatically when
powered on the first time, and any time a previously paired device
cannot be found.
9