Descargar Imprimir esta página

STAR Water Systems STPP15VS Manual De Instrucciones página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

PUMP OVERVIEW
(1) Speed Buttons
(8) "+" and "-"
Arrows
(7)"<" and ">"
Arrows
Arrows
Arrows
(2) Mode Select
Button
If power is connected to the Variable Speed Pump motor, pressing any of the following
buttons referred to in this section could result in the motor starting. Failure to recognize
this could result in personal injury or damage to equipment.
Keypad Navigation
1. Speed Buttons - Used to select the run speed
desired. The LED above the Speed Buttons
will illuminate when that speed is selected or is
currently running. A flashing LED indicates is
active on that speed channel.
2. Mode Select Button - Choose manual and
schedule
3. Start/Stop Button - Used to start and stop the
pump. When the pump is stopped and the LED is
not illuminated the pump is unable to run from any
type of input.
4. Display Mode LED indicators - An illuminated
LED indicates the information being displayed on
the screen at any specific point. A flashing LED
indicates that the parameter is currently being
edited.
6
Copyright © 2022. All rights reserved • 95 North Oak Street • Kendallville, IN 46755
5. Display button - Used to toggle between the
different available display modes. This button is
also used to set the 24-hour clock and screen
resolution.
6. Quick Clean Button - Used to run a selected
speed and duration programmed for Quick
Clean. When the LED is illuminated, Quick Clean
schedule is active. The Quick Clean feature can
be used to ramp the pump up to a higher RPM for
vacuuming, cleaning, adding chemicals, after a
storm for extra skimming capability. cycle is over,
the pump will resume regular schedules and be in
'Running Schedule' mode.
7. < and > Arrows - Choose between a 12 or 24
hour time format.
8. '+ and - Arrows - Used to make on screen
adjustments to the pump settings. The '+' arrow
increases the value of a given setting, while '-'
decreases the value of a given setting. Pressing
and holding down either arrow button will increase
or decrease the incremental changes faster.
(4) Display Mode
LED Indicators
(5) Display Button
(6) Quick Clean
Button
(3) Start/Stop
Button

Publicidad

loading