Safety; Intended Use; Personnel Qualification - WIKA DiwiTherm TR75 Manual De Instrucciones

Ocultar thumbs Ver también para DiwiTherm TR75:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Safety

2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate
thermometer has been selected in terms of measuring range, design and
specific measuring conditions.
Non-observance can result in serious injury and/or damage to the equipment.
Further important safety instructions can be found in the individual chapters of
these operating instructions.

2.1 Intended use

The DiwiTherm
thermometer is used mainly in the process industry to monitor process
®
temperatures.
The instrument has been designed and built solely for the intended use described here, and
may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the instrument outside of its technical specifications
requires the instrument to be taken out of service immediately and inspected by an
authorised WIKA service engineer.
If the instrument is transported from a cold into a warm environment, the formation of
condensation may result in instrument malfunction. Before putting it back into operation, wait
for the instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on operation contrary to
the intended use.

2.2 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to equipment.
The activities described in this operating instruction may only be carried out
by skilled personnel who have the qualifications described below.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their technical training,
knowledge of measurement and control technology and on their experience and knowledge
of country-specific regulations, current standards and directives, are capable of carrying out
the work described and independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive
media.
WIKA operating instructions DiwiTherm
, model TR75
®
EN
5

Publicidad

Tabla de contenido
loading

Tabla de contenido