SKF TKST 11 Instrucciones De Uso página 5

READ THIS FIRST
Safety precautions
Read this instruction for use fully. Follow all safety
precautions to avoid personal injury or property
damage during equipment operation. SKF cannot
be responsible for damage or injury resulting from
unsafe product use, lack of maintenance or incorrect
equipment operation. In case of any uncertainties as
regards the use of the equipment contact SKF.
This device is used for inspecting moving, rotating
and vibrating objects. It may only be used in
accordance with these instructions. The device must
not be opened. Modifications to the device are not
permitted. The manufacturer shall not be liable for
damage resulting from incorrect use or use contrary
to the intended use. Warranty claims will also be
invalidated in this event.
W A R N I N G :
Risk of injury!
• Moving machinery components should not be
touched with the probe.
• Do not touch moving machinery under any
circumstance.
• The device may not be used in potentially
explosive areas.
Warranty void!
• Do not expose the equipment to rough handling
or heavy impacts.
• Always read and follow the operating
instructions.
• Opening the housing of the instrument may
result in hazardous mishandling and voids
warranty.
• Do not expose the equipment to high humidity
or direct contact with water.
• All repair work should be performed by an
SKF repair shop.
Correct disposal!
• = The electronic components in the device
contain environmentally harmful substances.
They must be disposed of in accordance with
the environmental regulations in the country
of use.
N O T E :
• Suitable for use in residential, commercial and
industrial area.
• Not intended for medical use.
3
EN