Publicidad
Idiomas disponibles
Idiomas disponibles
SAVE THESE
INSTRUCTIONS
Do not discard the safety
instructions. Give a copy of the
instructions to the operator.
Specifications
Specifications at 90 psig (6.2 bar, 620 kPa)
Horsepower ...................................................0.25
Free Running Speed ............................. 12,000 opm
Recommended Air Pressure ..... 90 psig (620 kPa)
Air Consumption .................................... 18 SCFM
Air Inlet Thread Size ..........................1/4"-18 NPT
Recommended Hose Size ....3/8" (9.5 mm) ID min
Dimensions:
Length
PSO4512 ...........................................6.0" (153 mm)
PSO4525 ...........................................6.0" (153 mm)
PSO4612 ...........................................6.5" (165 mm)
PSO4625 ...........................................6.5" (165 mm)
PSO4625V ...................................... TBD (TBD mm)
PSOF4312 .........................................5.0" (127 mm)
PSOF4325 .........................................5.0" (127 mm)
PSOF4612 .........................................6.5" (165 mm)
PSOF4625 .........................................6.5" (165 mm)
PSOF4625V .................................... TBD (TBD mm)
Weight
PSO4512 ..................................1.8 lbs (0.82 kg)
PSO4525 ........................................1.8 lbs (0.82 kg)
PSO4612 ..................................1.8 lbs (0.82 kg)
PSO4625 ........................................1.8 lbs (0.82 kg)
PSO4625V ................................... TBD lbs (TBD kg)
PSOF4312 ................................1.8 lbs (0.82 kg)
PSOF4325 ......................................1.8 lbs (0.82 kg)
PSOF4612 ................................1.8 lbs (0.82 kg)
PSOF4625 ......................................1.8 lbs (0.82 kg)
PSOF4625V ................................. TBD lbs (TBD kg)
Noise* (Tested in accordance with ISO Standard
15744)
Sound Pressure Level (A)
PSO4512 .............................................73.8 dBA
PSO4525 ................................................... 78.5 dBA
PSO4612 .............................................77.1 dBA
PSO4625 ....................................................TBD dBA
PSO4625V .................................................TBD dBA
PSOF4312 ...........................................76.0 dBA
PSOF4325 ................................................. 76.1 dBA
PSOF4612 ........................... ................TBD dBA
PSOF4625 ................................................. 79.4 dBA
PSOF4625V ...............................................TBD dBA
Uncertainty, K .............................................. 3.0 dBA
Sound Power Level (A)
PSO4512 .............................................85.4 dBA
PSO4525 ................................................... 90.1 dBA
PSO4612 .............................................88.7 dBA
PSO4625 ....................................................TBD dBA
PSO4625V .................................................TBD dBA
PSOF4312 ...........................................87.6 dBA
PSOF4325 ................................................. 87.7 dBA
PSOF4612 ........................... ................TBD dBA
PSOF4625 ................................................. 91.0 dBA
PSOF4625V ...............................................TBD dBA
Uncertainty, K .............................................. 3.0 dBA
ZPSO4625CE Rev C
EN
EN
Vibration* (Tested in accordance with ISO
Standard 28927-12)
Vibration Level
PSO4512 .........................................4.76 m/sec
PSO4525 ...............................................5.90 m/sec
PSO4612 .........................................5.47 m/sec
PSO4625 ............................................... TBD m/sec
PSO4625V ............................................ TBD m/sec
PSOF4312 .......................................2.74 m/sec
PSOF4325 .............................................4.92 m/sec
PSOF4612 .......................................TBD m/sec
PSOF4625 .............................................6.29 m/sec
PSOF4625V .......................................... TBD m/sec
Uncertainty, K ......................................<1.00 m/sec
*These declared values were obtained by laboratory
type testing with the stated standards and are not
adequate for use in risk assessments. Values
measured in individual work places may be higher.
Values and risk of harm experienced by an individual
user are unique and depend upon the environment
and manner in which the user works, the work piece
and the workstation design, as well as upon the
exposure time and the physical condition of the user.
Snap-on disclaims liability for the consequences of
using the declared values, instead of values reflecting
the actual exposure determined in an individual risk
assessment in a work place situation over which we
have no control.
INTENDED USE
This tool is intended to be used with abrasive sanding
discs for the finish sanding of materials such as wood,
metal, fiberglass and similar materials. If it is used for
anything else, it is considered misuse, creates a hazard
and may void the warranty.
AIR SUPPLY
The efficiency and life of this tool depend on the proper
supply of clean, dry air at a maximum of 90 PSI. The use
of an airline filter, pressure regulator, and lubricator is
recommended. Before connecting to tools, blow out the
airline to remove water and dirt that may have
accumulated.
HOSE AND HOSE CONNECTIONS
The air supply hose recommended is 3/8" (10mm) I.D. If
an extension hose is necessary, use 1/2" (13mm) ID
hose with couplings not less than 3/8" (10mm) I.D. The
tool inlet thread is 1/4" NPT.
LUBRICATION
For maximum performance and tool life, an airline
lubricator, set to deliver 1 drop per minute. Snap-on IM6
Air Motor Oil is recommended. If an airline lubricator is
not used, add 8 to 10 drops of air motor oil to the air
inlet at the start of the day and run the tool for 10-20
seconds. Do not over lubricate because excess oil may
contaminate the surface being sanded.
MAINTENANCE
Water, dust and other airline contaminants can cause
rust and vane sticking. After long idle periods, flush the
tool with a few drops of oil and run for 10 seconds. This
will help remove contaminants and reduce the
formation of rust.
5
2
2
2
2
2
2
2
2
2
2
2
(02/20)
Publicidad
