Control Panel - CORBERO CCHF1072NAIRFRY Guía De Usuario

Control Panel

Signal Lamp
Function Knob
Signal Lamp
Function Knob
Function Button
Heating/cooking type is adjusted with function selection button.
You also need to set temperature button to a value with function selection button.
Otherwise, the product will not start to heat.
Temperature Button
It allows you to select the temperature of the oven. The cooking is started by selecting the
function type.
Mechanical Timer
It allows you to determine the time for the food to be cooked. The function and temperature
knob must also be set.
Digital Timer
It is an electronic timer which makes the food to be cooked prepared at the time you desire.
Signal Lamp
It is the lamp which indicates that the oven is heated. It goes out when the oven reaches to
the adjusted temperature.
Turning Off The Electric Oven
Switch the function and temperature buttons to zero (turned off) position.
The functions, which are available on the table, may vary in the different appliances, they may not be
available in every model.
*The related energy value in the fan supported cooking mode has been indicated based on this function.
The performed tests have been based on TS EN 60350 standard and (EV) No 66/2014 regulation.
78
Mechanical Timer
Digital Timer
Temperature Knob
Temperature Knob