Franke MYTHOS FMY 839 HE Manual Del Usuario página 4

EN
technician. Before making
the electrical connection,
please read the section on
ELECTRICAL CONNECTION.
For appliances with a power
supply cable, the terminals or
section of wire between the
cable anchor point and the
terminals must be arranged in
such a way as to allow the live
wires to be pulled out before
the earth wire in the event of
the cable coming out of its
anchor.
The manufacturer will not
be liable for any damage
resulting from incorrect or
inadequate installation.
Check that the mains power
supply corresponds to
the one indicated on the
identification plate fixed to
the inside of the product.
Fixed electrical connections
must incorporate the cut-out
devices envisaged by current
regulations.
For class I appliances,
check that the domestic
FMY 839 HE
power supply guarantees an
adequate earthing system.
Connect the suction
hood to the flue using a
suitable pipe. Please refer
to the accessories to be
purchased, indicated in the
installation manual
(for circular pipes: minimum
diameter 120 mm). The
exhaust pipe must be as
short as possible.
Connect the product to the
mains using an omnipolar
switch.
The air venting regulations
must be complied with.
Never connect the suction
appliance to ducts carrying
combustion fumes (heaters,
fireplaces, etc..).
If the suction hood is used
alongside non-electrical
appliances (e.g. appliances
with gas burners), it is
necessary to guarantee a
sufficient level of ventilation
in the room, to prevent any
exhaust backflow. When
the cooking appliance is
used together with other
– 4 –