Intermatic GRASSLIN talento smart Manual De Instrucciones página 57

1. Press the button:
Menu
2. Select and confirm with
Program
For clarification of the following action steps, see flow chart.
3. Select and confirm with
New
4. In step
With Date?
confirm with (also refer to Seite 52).
OK
5. Select and confirm with
Impulse
6. Enter hour and minute of the start time (+/-) and confirm each with
NOTE: The data for sunrise and sunset should be considered in connection with the astro-variant.
The choice of these parameters is between 11 p.m. and midnight.
7. Enter hour(s), minute(s) and second(s) of the impulse duration (+/-) and confirm each with
8. Set the weekday(s) (+/-) to which the switching time should apply, and confirm with
NOTE: The weekdays 1-5, 6-7 and 1-7 are preset. Individual weekdays can be set (+/-) under
"Select days".
9. Select channel (+/-) for which the impulse should be set, and confirm with
(1)
NOTE: The plus sign stands for active, the minus sign for an inactive channel.
10. Select to create an additional switching command or select
YES
priority .
(2)
The channel selection is only available with 2-channel timers
(1)
The choice of priority is only possible in advanced mode; refer to „Defining prioritisation of programs"
(2)
auf Seite 61.
OK.
.
OK
,specify whether the device is to be activated on a certain date and - if yes -
.
OK
.
OK
.
OK
.
OK
to determine the possible
NO
EN
.
OK
57