Intermatic GRASSLIN talento smart Manual De Instrucciones página 59

Menu Menü
Program OK
Programm
New
OK
Neu
With Date? OK
Mit Datum?
Yes/No
Ja / Nein
1. Press the button:
Menu
2. Select and confirm with
Program
For clarification of the following action steps, see flow chart.
3. Select and confirm with
New
4. In step
With date?
yes - confirm with
OK
5. Select and confirm with
Cycle
6. Enter hour and minute of the start time (+/-) and confirm each with
7. Enter period ON (+/-) and confirm each with
8. Enter period OFF (+/-) and confirm each with
9. Select weekdays (+/-) on which the cycle should be started and confirm with
NOTE: The weekdays 1-5, 6-7 and 1-7 are preset. Individual weekdays can be set (+/-) under
"Select days".
10. Select channel (+/-) for which the cycle should be set, and confirm with
(1)
NOTE: The plus sign stands for active, the minus sign for an inactive channel.
11. And choose possible
Program the command
OFF
The channel selection is only available with 2-channel timers
(1)
The choice of priority is only possible in advanced mode; refer to „Defining prioritisation of programs"
(2)
auf Seite 61.
OK
Select FNC
FKT wählen
Cycle
Zyklus
Time Zeit
09:00
09:00
... Minutes
... Minute
Dauer EIN Period ON
00:10:00 00:10:00
. Minuten .. . Minutes ..
Dauer AUS Period OFF
00:30:00 00:20:00
. Minuten .. . Minutes ..
OK.
.
OK
determine whether the device should be activated on a certain date and - if
(also refer to Seite 52).
.
OK
OK.
OK.
.
Priority
(2)
in Menu end the cycle switching command.
FKT
Days
Tage
12345--
12345--
Mo-Fr
Mo–Fr
OK
Channels Kanäle
1– 1–
CH1 Add Time?
CH1
OK
OK
.
OK
OK
OK
(1) (1)
OK
Weitere Schaltzeit?
Yes/No
Ja/Nein
OK
Priority
Priorität (2)
(2)
High
Hoch
.
OK
.
OK
EN
59