Intermatic GRASSLIN talento smart Manual De Instrucciones página 60

Random programming
E
Menu Menü
OK
Program
Programm
OK
New
Neu
With Date? OK
Mit Datum?
Yes/No
Ja / Nein
Random programming is possible only in advanced mode.
Example: Random  15:00  +02:00  1 2 3 4 5  1
Channel 1 is switched on Monday to Friday between 15:00 and 17:00. The exact switch-on time point is
random in this range.
1. Press the button:
Menu
2. Select and confirm with
Program
For clarification of the following action steps, see flow chart.
3. Select and confirm with
New
4. In step
With date
yes - confirm with
OK
5. Select
Random ON
NOTE: The period of the random switching is defined with ± 2 hours.
6. Enter hour and minute of the start (+/-) and confirm each with
7. Enter hour and minute of the range of the random programming (+/-) and confirm each with
8. Set weekday on which the device should randomly switch and confirm with
1-5, 6-7 and 1-7 are preset. Individual weekdays can be set (+/-) under "Select days".
9. Set the channel which is to be programmed, and confirm with
(1)
NOTE: The plus sign stands for active, the minus sign for an inactive channel.
10. And choose possible
The channel selection is only available with 2-channel timers.
(1)
The choice of priority is only possible in advanced mode; refer to „Defining prioritisation of programs"
(2)
auf Seite 61.
OK
Select FNC
FKT wählen
Random ON/
Zufall EIN
Time
Zeit
15:00 15:00
Hour
Stunde ...
Zeitraum Offset
+02:00 +02:00
Stunde ... Hour ...
Days
Tage
12345--
12345--
Mo-Fr
Mo–Fr
OK.
.
OK
determine whether the device should be activated on a certain date and - if
(also refer to Seite 52).
or and confirm with
Random OFF
.
Priority
(2)
Kanäle Channels
1 –
1 –
CH1 CH1
OK
OK
OK
.
OK
.
OK
.
OK
OK
(1) (1)
OK
Add Time?
Weitere Schaltzeit
Yes/No
Ja/Nein
OK
Priority Priorität (2) (2)
Niedrig Low
.
OK
. NOTE: The weekdays
OK
60
EN