Publicidad
Idiomas disponibles
Idiomas disponibles
EN
8
Overload:
The red LED light indicates when too much paper is inserted. Use
Reverse mode to back up and reduce the number of sheets.
Door Open:
The red LED light indicates the shredder bin is not pushed in
properly. Shredders with pull-out bins feature a safety power cut-off
upon bin removal. Make sure the pull-out bin is properly set back into
place and the green "Power On" indicator is lit.
Bin Full:
When the bin is full, the RED light will indicate it needs to be emptied.
While lit, the shredder will be inoperable until the bin is cleared.
NOTICE
Always turn off and unplug the shredder when not in
use.
NOTICE
This shredder will shred staples and small paper clips.
It is recommended that you remove paper clips whenever possible to
extend the lifespan of your shredder.
NOTICE
Only shred credit cards by feeding them vertically into
the middle of the slot, releasing when shredding begins. Never feed
in more than one credit card at a time.
NOTICE
Overfeeding the shredder: Shredding beyond the
specified sheet capacity can result in extensive damage to the
shredder. Overfeeding will strain the machine and quickly wear and
break the cutting blades and internal components.
NOTICE
Overheating with extended use: In the event that the
shredder has shredded continuously beyond the maximum running
time and overheats, the unit will automatically shut off. If this happens,
switch the shredder off for 50 minutes or longer before resuming normal
operation.
Cleaning and Maintenance
W ARNING
Risk of electric shock! To prevent electric shock,
unplug before cleaning.
W ARNING
Risk of electric shock! During cleaning, do not
immerse the electrical parts of the product in water or other liquids.
Never hold the product under running water.
W ARNING
Risk of fire or explosion! Do not spray or keep any
aerosol products in or around the product.
Cleaning
•
To clean, wipe with a soft, slightly moist cloth.
•
Dry the product after cleaning.
Publicidad
