Kohler K-8298-CR-0 Guia Del Usuario página 5

Grounding Instructions (cont.)
*Outside North America, this device may be known as a
Residual Current Device (RCD).
NOTICE: Follow local codes when determining the connection type.
The temporary connection may not be permitted by local electrical
codes.
NOTICE: To avoid possible product malfunction, do not plug in the
seat until instructed.
Preferred Connection
Connect the grounding plug into a grounded outlet that has the same
configuration as the plug.
Temporary Connection
NOTICE: Unless the outlet cover screw is grounded through the house
wiring, attaching the adapter grounding screw tab to the cover screw
will NOT ground the unit. If there is any doubt whether the cover screw
is grounded, have it checked by a qualified electrician or service
professional.
A temporary connection with a two-prong adapter may be used if a
properly grounded outlet is not available.
The temporary adapter should be used only until a properly
grounded outlet can be installed by a qualified electrician.
The green colored rigid ear, lug, and the like extending from the
adapter must be connect to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must
be held in place by the screw.
Pairing a Remote Control
A remote control must be paired with the seat before use. The
remote included should already be paired with your seat. If a
replacement remote is required, follow the instructions below to
pair it with your seat.
Only one remote control can be paired with the seat at a time.
Bring the new remote control near the seat.
Make sure that all other remote controls have been removed from
the area of the seat.
Press and hold the "Dryer" icon until the icon flashes.
Kohler Co. 5 1381632-5-B