EQUATION AC-2 Manual De Instrucciones página 46

Sleep function
The Sleep function can be used in Cooling mode. This function provides a more comfortable environment for sleeping.
1 - Switch on the appliance, choose the Cool mode and adjust the setpoint temperature and the fan speed
FR
2 - Press the
3 - The function is automatically deactivated after 8 hours of operation and returns to the previously set mode.
Swing
ES
Press the SWING button on the remote control to activate the swing of the air outlet.
Child Lock
PT
Simultaneously press the DRY and MODE buttons on the control panel for 3 seconds to
lock or unlock the Remote Control
IT
CARE
EL
Cleaning the dust filter
It is advisable to clean the dust filter every 250 hours of use to promote proper air circulation and optimum performance of the
air conditioner.
PL
UA
RO
EN
The filter cleaning
indicator lights up
after 250 hours
of use
Cleaning of exterior parts
Use a soft, dry cloth. For strong stains, use a cloth dampened with soapy water and wipe immediately with a
dry cloth.
Emptying the water tank
In cooling mode, the internal water tank must be emptied regularly. If the display shows "P1", the tank must be emptied.
Switch off the device and
unscrew the lower cap
46
button on the control panel or the SLEEP button on the remote control to activate the Sleep function.
Open the rear of the device
and remove the filter
Bring the device above a
container and remove the
rubber cap
Remove dust from the For strong stains, use
filter using a vacuum soapy water and dry
cleaner before replacing the
filter.
When the tank is empty,
replace the rubber cap
Press the
button to reset
the counter.
Screw the cap back on and
restart the appliance.