Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance and Care
A basic amount of care and maintenance will allow your tester to provide years of
valuable service.
• After each use, ensure that there is no corrosion on clamps. If there is corrosion
on clamps, use a damp cloth to wipe corrosion off of the clamps.
• After each use, ensure that leads have not been damaged or come into contact
with aggressive fluids, such as grease, engine oil, ATF or battery corrosion.
If leads are damaged, call Technical Service at 913.310.1050 immediately.
NEVER use tester if leads show signs of damage. If leads have come into
contact with aggressive fluids, use a damp cloth to wipe the leads clean.
• After each use, properly store the tester to protect it when not in use.
• If tester body becomes dirty or soiled, use a damp cloth to wipe it clean.
• If tester display becomes dirty, use a screen cleaning product, such as those
used to clean glasses or computer monitors, to wipe the display clean. When
cleaning the display, take care not to scratch or otherwise damage it.
• Periodically replace onboard batteries to avoid a situation where the batteries run
down at a critical moment.
• When storing the tester for extended periods, remove onboard batteries.
Publicidad
