cecotec Conga Eternal Max X-Treme Manual De Instrucciones página 61

The robot cannot charge or return to
the charging base.
The robot does not work properly.
The robot emits a strange noise during
cleaning.
The robot does not efficiently clean or
dust leaks from the robot.
The robot could not connect to the
Wi-Fi network.
There are too many obstacles near the charging
base, relocate the charging base to an area free
of obstacles.
Clean the charging terminals on both the
charging base and the robot.
Make sure the robot vacuum cleaner is on.
The robot is too far away from the charging
base. Place it closer and try again.
Turn off the robot vacuum cleaner and turn it
on again.
Reset the robot by pressing the reset side
button.
The main brush, side brush, or omnidirectional
wheel may be blocked or tangled. Stop the robot
and clear them up.
The tank is full. Empty it and clear the high-
efficiency filter if it is blocked.
The high-efficiency filter is blocked. Clear it.
The main brush is tangled with blocked or
tangled, please clear it up.
Bad Wi-Fi signal. Check that the robot vacuum
cleaner is in an area with good Wi-Fi signal.
The Wi-Fi connection is unstable. Reset the
router, check if there are any App updates,
and try again. This machine only supports the
2.4GHz band.
Make sure that your device mobile data are
deactivated to improve the linking process.
ENGLISH
ETERNAL MAX X-TREME
61