Publicidad
Operator's guide:
1. Unpacking instructions
2. The handles
3. Grid shelving
I
4. Internal cleaning
5. External cleaning
UK
6. Connection to the mains
7. Checking correct operation
D
8. Replacing the internal lights
9. Replacing the door's magnetic gasket
E
F
!
WARNINGS (see figure 10)
It is most important that this instruction booklet is kept together with the appliance both for future
NL
reference and for reasons of safety.
1
. Adults should operate this appliance only. Do not allow children to use the controls or play with it. . It
P
is forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical
installation of the appliance should be carried out by a qualified electrician or other competent person.
S
4. Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
5
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs.
6
DK
7. The manufacturers of this appliance accept no responsibility for the consequences of misuse in
contravention of these safety instructions. It further reserves the right to carry out improvements without
FIN
prior notice. 8
sources of heat (such as radiators, stoves, etc) and drafts (such as windows, doors, ventilation systems,
B
air conditioning, etc ...).
that the products displayed on the shelves and grills do not hang over the edges.
GR
products to be refrigerated should cause ice to form on the evaporator, we recommend stopping the
compressor and placing the goods in special refrigerated containers, kept at the same temperature, until
CZ
defrosting is completed;if this is not carried out the compressor will continue to operate leading to a
wasteful consumption of electricity and poor performance.
it is indispensable to keep the door open at least 30 cm. Avoiding this, you will avoid also the consequent
EE
mildew formation and unpleasant smells.
LV
!
Our products are for internal use only – do not install outside restaurants, shops.
LT
H
1. UNPACKING INSTRUCTIONS
CARDBOARD PACKAGE 1a
M
Remove the nails from the wooden crate with care.
and pallet or crate
PL
the front corners.
means of the adjustable feet.
8. Separate the packaging materials to facilitate disposal (see figure 1).
SK
2. THE HANDLES
SLO
1
. The handles can be found inside the appliance in a bag. . Fix the metal part of the handle to the door
frame using the two screws already inserted in the holes. Tighten with care (see figure 2).
3. GRID SHELVING G models
1.
The grids can be found at the bottom of the cabinet.
height-adjustable supports (see figure 3).
4. INTERNAL CLEANING
1. Clean the internal surfaces and glass panels with a soft, damp sponge and a neutral detergent only.
2. Dry with a soft cloth.
5. EXTERNAL CLEANING
1
. For the glass panels, use the same products as used for the internal cleaning. . Remove the
protection from the steel parts of the panel and the grilles (see figure 4).
6. CONNECTION TO THE MAINS
1.
Ensure that mains voltage and frequency are the same as those stated on the rating plate
to the appliance.
earthed.
b)
It fulfils the requirements of the rated current as set out on the rating plate.
the IEC regulations: - magnetothermal differential switch with In = nominal value as stated on the rating
plate; - Differential with Id sensitivity = 30 mA. 3. Ensure that there is no danger of explosion (AD) in the
room.
4.
The connecting cable to the appliance is H05 VVF, designed for internal use.
. Avoid installing the cabinet directly in line with sunlight. . Never install the appliance near
10
. Keep the ventilation grills free from obstruction for at least 30 cm.
Cut the strap and lift up the cardboard package.
. 3.
Lift the appliance.
6.
Place the appliance on a flat and level surface and make any level adjustments by
7.
Make sure there is nothing left in the package before disposal.
2.
Ensure that the supply socket has the following characteristics:
Operator's guide
Maintenance manual
1. Cleaning the condenser
2. Internal cleaning
3. Wiring Diagram,Refrigeration Unit Diagram
13
. If the appliance is not working and unused,
14.
Do not keep the neon light up if the refrigeration is off.
2.
Insert the forks of a forklift truck between appliance
4.
Remove the pallet or crate.
2
2.
Assemble the grids by fitting them into the
6
3
9
11
. Ensure
12
. If damp air or
WOODEN CRATE 1b
5.
Screw the adjustable feet onto
2
(A)
a) it is properly
c)
It complies with
2
attached
Publicidad
