WIKA A-1200 Manual De Instrucciones página 18

8. Dismounting, return and disposal
WARNING!
Risk of burns
During dismounting there is a risk of dangerously hot media escaping.
The pressure sensor may have heated up severely due to hot media.
EN
▶
▶
Dismounting the instrument
1. Depressurise and de-energise the pressure sensor.
2 Disconnect the electrical connection.
.
3 Unscrew the pressure sensor with a spanner using the spanner flats.
.
8.2 Return
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous substances (acids, bases, solutions, etc.)
and must therefore be cleaned before being returned.
WARNING!
Physical injuries and damage to property and the environment through residual media
Residual media in the dismounted instrument can result in a risk to persons, the environment and
equipment.
▶
▶
When returning the instrument, use the original packaging or a suitable transport packaging.
Information on returns can be found under the heading "Service" on our local website.
18
Let the instrument cool down sufficiently before dismounting it.
Wear the requisite protective equipment.
With hazardous substances, include the material safety data sheet for the corresponding medium.
Clean the instrument, see chapter 7.2 "Cleaning".
WIKA operating instructions, pressure sensor, model A-1200