Publicidad
Idiomas disponibles
Idiomas disponibles
b. Insert the charging plug into
charging port of the tool, making
sure that they are properly
connected.
c. Connect the power supply
(together with USB charging
cable) to the power outlet (FIG.2)
NOTE: Do not operate the tool
during charging.
The LED indicator for battery capacity communicate the charge
status during the charging process.
The LED indicator for battery capacity flickers red during charging
•
when the charged battery capacity will allow the tool to be
operated for approximately 30 minutes or less.
The LED indicator light flickers yellow during charging to indicate
•
that the charged battery capacity will allow the tool to be operated
more than 30 minutes but has not reached 90% of full capacity.
The LED indicator light flickers green during charging to indicate
•
that the charged battery capacity has reached more than 90% of
full capacity.
The LED indicator light steadily shines green when the battery
•
has reached full charge capacity.
Remember to remove the USB charging cable from tool when
charging is complete.
NOTE: During normal use, the LED indicator for battery capacity will
illuminate continuously in different colors to indicate approximately
how much battery capacity remains.
When the LED indicator light illuminates green, it indicates that
•
the battery charge is more than 40% of full capacity.
When the LED indicator light illuminates yellow, it indicates that
•
the battery charge is less than 40% of full capacity
Fig. 2
Power Supply
(not included)
13
Publicidad
