Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL LASER TOOL SAFETY WARNINGS
READ ALL INSTRUCTIONS BEFORE USING THE
TOOL!
CAUTION/PRECAUCIÓN/ATTENTION
LASER RADIATION-DO NOT STARE INTO BEAM
RADIACIÓN LÁSER: NO MIRE DIRECTAMENTE EL RAYO
RAYONNEMENT LASER – NE FIXEZ PAS DES YEUX LE
RAYON LASER
520nm, OUTPUT < 1mW/CLASS II LASER PRODUCT
3.7V
COMPLIES WITH 21 CFR PARTS 1040. 1 0 AND 1040. 1 1
PRODUCTO LÁSER CON SALIDA < 1mW. CLASE II,
520 nm, 3,7V
CUMPLE CON LAS SECCIONES 21 CFR 1040.10 Y 1040.11
520 nm, SORTIE < 1 mW/PRODUIT LASER DE CLASSE II
Pile au lithium-polymère de 3,7 V,
CONFORME AUX NORMES 21CFR ARTICLES 1040.10
ET 1040.11
CAUTION: Risk of re and burns. Do not open, crush, heat
above 100° C (212° F) or incinerate.
PRECAUCIÓN : Riesgo de incendio y quemaduras. No abra,
triture, permita que esté a mayor temperatura que 100° C
(212 °F) ni incinere.
ATTENTION : Risque d'incendie et de brûlures. N'ouvrez pas
le produit, ne l'écrasez pas, ne le chauffez pas à plus de
100ºC (212°F) et ne l'incinérez pas.
Model / Modelo / Modèle: LL9324G-00
4.44 Wh
CAN ICES-3(B)/NMB-3(B)
MADE IN CHINA / HECHO EN CHINA
FABRIQUÉ EN CHINE
SERIAL NO.
SERIE NO.
NUMÉRO DE SÉRIE
WARNING
Class II laser product. Turn the laser beam on only when using this
tool.
Do not remove or deface any product labels .
Avoid direct eye exposure . The laser beam can cause flash
blindness.
Do not operate the tool around children or allow children to operate
the tool.
Do not place the tool in a position that may cause anyone to stare at
the laser beam, whether intentionally or unintentionally.
Do not use on surfaces such as sheet steel that have shiny,
reflective surfaces. The shiny surface could reflect the beam back at
the operator.
1200mAh Li-Polymer
1200mAh polímero de litio
1200 mAh
LASER RADIATION . Do not stare into beam.
AVOID EXPOSURE/EVITE LA
EXPOSICIÓN/ÉVITEZ
L'EXPOSITION
LASER RADIATION IS EMITTED
FROM THIS APERTURE
LA RADIACIÓN LÁSER SE EMITE
DE ESTA ABERTURA
CET OUTIL PRODUIT UN
RAYONNEMENT LASER
3
Publicidad
