Publicidad
Idiomas disponibles
Idiomas disponibles
5) Install the proper length adapter
using a 15/16" socket with exten-
sion.
6) Install the bodyspray assembly by
pushing it firmly into the valve (see
illustration), making sure that the
portion with two notches is at 6
o'clock.
Secure the bodyspray assembly to
the valve with the four screws that
were removed in Step 2.
7) Align the tab on the top of the back of
the faceplate with the top notch on the
bodyspray assembly, and turn the faceplate
clockwise until it locks in place.
Secure the faceplate with the included set
screw.
Your new bodyspray is designed for years of trouble-free performance. Keep
it looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as these will dull the finish. Failure to
follow these instructions may void your warranty.
Installing the Bodyspray (continued)
CARE & CLEANING
Adapter
Faceplate
Set Screw
5
Valve
Two notches at
6 o'clock
Publicidad
