Torin BIG RED T90203B Manual Del Propietário página 10

TO ADD JACK OIL
1. Position the jack on level ground and lower the
saddle.
2. Remove the oil plug.
3. Fill the oil case until oil level is just beneath the
lower rim of the oil fill hole.
4. Replace oil plug.
5. Perform the System Air Purge Procedure.
*SEE ASSEMBLY IMAGE FOR JACK OIL
RESEVOIR LOCATION.
TO REPLACE JACK OIL
1. Position the jack on level ground and lower the
saddle.
2. Open release valve by turning handle counter-
clockwise (4 full turns).
10