Cherubini Domi A510044 Manual De Instrucciones página 24

Deactivate the DOMI-Cloud connection
Make sure that the DOMI and your Tablet/Smartphone are connected to the same
domestic network. Otherwise, the DOMI and Tablet/Smartphone will be communicating
only in the Cloud. Therefore, it would be impossible to change the settings.
- In the text bar in the upper centre of the screen (white on Android, grey on iOS) click on
DOMI-XXXXXX, and choose the option "Find DOMI on the network".
- The DOMI App will restart once it has found the private network.
- Open the Options menu.
Ÿ Select the CONF DOMI screen.
Ÿ Disable the "Enable DOMI Cloud" function.
Ÿ Save the operations just completed
Now, DOMI will run in Client Mode but without calling up the Cloud server.
UTILITY CONFIGURATIONS
Utility screen and creating a new utility:
- Open the "utility" menu from the quick access bar.
- Access the "Change utility" section from the icon
- Create a new utility by clicking on
- Name the new utility and choose the type of actuator (blinds, awnings, drapes, etc.).
- Save the utility created
- Close the "Change utility"menu (icon
Select the utility just created to view and activate the available commands.
ASSOCIATE A DOMI UTILITY WITH A CHERUBINI PRODUCT
To operate a newly created DOMI utility, it must be associated with a Cherubini product
(motor or control unit).
Firstly, the advanced settings must be enabled:
- In the"APP" section of the "Settings" page, turn on "Enable advanced settings".
- Save the settings.
At this point, displayed on the right hand side of the "utility" page the advanced settings
just enabled will be displayed among the commands available.
.
.
.
).
24
.