Publicidad
Idiomas disponibles
Idiomas disponibles
a) Programming a Chase
1. Select a chase containing programmed scenes by pressing the appropriate CHASE button.
2. Select a scene from a bank with ▲ or ▼ and press the corresponding SCENE button.
3. Press the MIDI/ADD button.
b) Copying all Scenes from a Bank to a Chase
1. Select the desired bank with ▲ or ▼.
2. Press the MUSIC/BANKCOPY button.
3. Press the MIDI/ADD button.
c) Adding a Step to a Chase
Example : inserting a scene as step 10 in an existing 15-step chase.
1. Press TAPSYNC/DISPLAY to display the CHASE and its STEP on the LCD.
2. Select STEP 9 with ▲ or ▼.
3. Press MIDI/ADD, making the step turn to 10.
4. Select a scene from the bank with ▲ or ▼ and then press the corresponding SCENE button.
5. Press MIDI/REC to add the new scene to the newly inserted step. The previous step 10
becomes step 11, etc..
d) Deleting a Step from a Chase
Example : deleting step 10.
1. Press TAPSYNC/DISPLAY to display the CHASE and its STEP on the LCD.
2. Select step 10 with ▲ or ▼.
3. Press AUTO/DEL : step 11 becomes step 10, step 12 becomes step 11, etc.
e) Deleting a Chase
1. Select the desired chase with the CHASE button.
2. Press AUTO/DEL while holding that CHASE button.
f) Clearing all Chases
1. Press ▼ and AUTO/DEL simultaneously while deactivating the device.
2. Turn the device back on.
Running Scenes
The device is in RUN mode when it is turned on. Hold the PROGRAM button for 2 seconds to
enter the PROGRAM mode. Subsequently, the device automatically switches to the
BLACKOUT mode. Press the BLACKOUT button to enter the RUN mode. Only those scenes
programmed into a bank can be run.
VDPDMXC145
6
VELLEMAN
Publicidad
