Brinkmann 810-4580-S Manual Del Propietário página 27

Figure 1
Right Side Table Assembly
Figure 3
Silver Bolt
Figure 1a
Sear Burner Valve
Figure 2a
Sear Burner Knob
Figure 2
M6 Washer
M5 X 12 mm
Hole
Bezel
Step 12
To attach the right side table
assembly, fi rst insert the side table's
fi xed stands onto the grill body hooks
(Figure 1).
Open the grill hood, then use one
M5 x 12 mm bolts (black) and one
M6 washer to secure the right side
table assembly to the grill body from
the inside (Figure 2).
Use two M6 x 12 mm (black) bolts
and one M6 x 12 mm (silver) bolt to
secure the side table base
(Figure 3).
Step 13
Insert the pre-attached bolts in the
sear burner valve assembly through
the holes in the sear burner front
panel (Figure 1a & 1b). Rotate the
burner valve assembly counter-
clockwise in the keyholes on the
sear burner control knob bezel
as shown to lock in place (Figure
2b). Tighten with screwdriver. Then
install the sear burner knob onto
valve stem (Figure 2a).
Figure 1b
Bolts and Spring
Washers
Figure 2b
26