Kenwood KDC-X799 Manual De Instrucciones página 12

SiriusXM® Radio
Only SiriusXM® brings you more of what you love to listen to, all in one
place. Get over 140 channels, including commercial-free music plus the
best sports, news, talk, comedy and entertainment. Welcome to the world
of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required.
For more information, visit www.siriusxm.com.
Preparation:
1
Connect the optional SiriusXM Vehicle Tuner (commercially
available).
Antenna
Expansion port on
the rear panel
2
Check your Radio ID for activation.
The SiriusXM Radio ID is required for activation and can be found by
tuning to Channel 0 as well as on the label found on the SiriusXM
Connect tuner and its' packaging.
The Radio ID does not include the letters I, O, S or F.
3
Activate the subscription.
For users in U.S.A.:
Online: Go to www.siriusxm.com
Phone: Call 1-866-635-2349
For users in Canada:
Online: Go to www.siriusxm.ca/activatexm
Phone: Call 1-877-438-9677
4 Press repeatedly to select SIRIUS XM to start updating.
10
SiriusXM Vehicle Tuner
Start listening
1 Press repeatedly to select SIRIUS XM.
2 Press repeatedly to select a band.
3 Press .
" " lights up.
4 Turn the volume knob to select a category, then press the knob.
If "ALL CHANNELS" is selected, all the available channels will be
shown.
5
Turn the volume knob to select a channel, then press the knob.
(or)
Press S / T to search for a channel manually.
• Pressing and holding S / T changes the channel rapidly.
If a locked channel or a mature channel is selected, a pass code input
screen appears. Enter the pass code to receive the channel. ( 12)
To change the tuning method for S / T: Press
Each time you press , the tuning method switches between
"CHANNEL" (manually search for a channel) and "PRESET" (searches for a
preset channel of the selected band).
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a channel number.
3 Press to start searching.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
is automatically canceled.
.
2
, Direct Access Tuning