Publicidad
Idiomas disponibles
Idiomas disponibles
HD Radio™ tuner
You can tune in to both conventional and HD Radio broadcasts.
• To find HD Radio stations in your area, visit
<http://www.hdradio.com>.
Search for a station
1
Press
repeatedly to select HD RADIO.
2
Press
repeatedly (or press
RC-406) to select FM1/ FM2/ FM3/ AM.
3
Press S / T (or press S /
for a station or channel.
• To change the searching method for S / T: Press
repeatedly.
AUTO1
: Automatically search for a station or channel.
AUTO2
: Search for a preset station or channel.
MANUAL : Manually search for a station or channel.
• To store a station or channel: Press and hold one of the
number buttons (1 to 6).
• To select a stored station or channel: Press one of the number
buttons (1 to 6) (or press one of the number buttons (1 to 6) on
RC-406).
Direct Access Tuning (using RC-406)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a frequency.
3
Press
to search for a station or channel.
• To cancel, press
or DIRECT.
• If no operation is done for 10 seconds after step
Tuning is automatically canceled.
Select an HD Radio multicast channel
Many HD Radio stations offer more than one channel programming.
This service is called multicasting. While receiving HD Radio multicast channels....
Press S / T to select your desired channel (HD1 to HD8).
"LINKING" appears while linking to a multicast channel.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to make a selection (see the following table), then
press the knob.
3
Repeat step
4
Press and hold
/
on
To return to the previous setting item, press
on RC-406) to search
TUNER SETTING
IF BAND
AUTO
MEMORY
RECEIVE
MODE
CLOCK
TIME SYNC
2
, Direct Access
2
until the desired item is selected or activated.
to exit.
AUTO: Increases the tuner selectivity to reduce interference noises from adjacent
FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from
adjacent FM stations, but sound quality will not be degraded and the stereo effect
will remain.
YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)
Sets the receive mode of the HD Radio receiver.
AUTO: Automatically tunes to analog broadcast when there is no digital broadcast. ;
DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in to analog broadcast
only.
ON: Synchronizes the unit's time to the Radio Broadcast Data System station time. ;
OFF: Cancels.
.
Default: XX
5
ENGLISH
Publicidad
