Front Panel; Display Window - Pioneer MCS-838 Manual De Instrucciones

22 Before you start
En

Front panel

1
* The illustration is for
MCS-838/MCS-434/MCS-FS232
1 Disc tray
2 Operation buttons
(OPEN/CLOSE)
FUNCTION
Changes the input source or function.
When switching while viewing the display
window using the button on the front panel
1. The input source switches every time the
FUNCTION is pressed.
2. Select the desired input source and press
(PLAY/PAUSE).
The FUNCTION button switches the input
source for the [Source Menu]. Select Home
Media Gallery to playback disc. (page 48)
BASS BOOST
Turn BASS BOOST ON or OFF.
(PLAY/PAUSE)
(STOP)
(STANDBY/ON)
Switches the unit ON or OFF.
Note
If the power does not turn OFF, pressing the
(STANDBY/ON) button for more than 5 seconds
reboots the unit and the operation becomes
possible.

3 Display Window

1 2 3 4
5 6 7 8
4 Remote control sensor
Point the remote control to this, then
operate it within approximately 7 m. The
player may have trouble capturing remote
control signals if there is a fluorescent light
nearby. If this happens, move the player
away from the fluorescent light.
5 Front input indicator
Lit at the following times.
recognized by the unit.
is ON.
6 MIC 1, MIC 2
7 PORTABLE IN
8 USB Port
iPad. (MCS-838/MCS-434/MCS-FS232)
333/MCS-FS131)
Caution
The USB port on the front of the unit cannot be
used for recording. Please connect to the USB
port on the rear of the unit.
9 Volume control
a Ring indicator
5 9 a