Ending Wi-Fi Direct Connection; Change Ssid And Password - Pioneer MCS-838 Manual De Instrucciones

64 Playback from Home Media Gallery
En

Ending Wi-Fi Direct connection

Press RETURN
screen is displayed.
The connection will be terminated. Network
settings will be returned to what they were
before using this function.
Note
If you wish to playback a disc, USB device or web
Mode Screen.

Change SSID and password

Change the SSID and password used to
connect the unit and a mobile device.
1. Press STANDBY/ON and the power
to the unit will come on.
The Pioneer logo will be displayed on the TV
screen.
5
2. Press to display the Wi-Fi Direct
mode screen.
3. Use / to select [Refresh], then press
ENTER.
SSID and password will be changed.
The connection between the unit and
mobile device will be terminated. After the
connection is terminated, when using the
also need to set up the connection again.
Caution
All connection settings that have been setup for
mobile devices will be removed.
The SSID and password will not change until
an update (Refresh) is performed. You should
periodically perform an update (Refresh) for
security reasons.