Maintenance And Cleaning; Faults; Dismounting, Return And Disposal - WIKA A-IUR-1 Manual De Instrucciones

7. Maintenance and cleaning / 8. Faults

7. Maintenance and cleaning

7.1 Maintenance
This indicator module is maintenance-free.
Repairs must only be carried out by the manufacturer.

8. Faults

Errors
No display
CAUTION!
If faults cannot be eliminated by means of the measures listed
above, the indicator module must be shut down immediately, and
it must be ensured that signal is no longer present, and it must be
prevented from being inadvertently put back into service.
In this case, contact the manufacturer.
If a return is needed, follow the instructions given in chapter 9.2
"Return".

9. Dismounting, return and disposal

9.1 Dismounting
Follow the instructions in chapter 6.1 "Mounting the indicator module", as far
as step three.
9.2 Returns
When returning the instrument, use the original packaging or a suitable
transport package.
WIKA operating instructions unitrans
Causes
No power supply
indicator module model A-IUR-1

Measures
Check connection cable
Cable correctly inserted
■
Cable not damaged
■
GB
13