Descargar Imprimir esta página

Bose S1 PRO+ Manual De Instrucciones página 71

Ocultar thumbs Ver también para S1 PRO+:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 306
SYMPTOM
Distorted audio from an
instrument or
audio source
Humming or buzzing
when nothing is plugged
into the system
Feedback from a
microphone connected
to the system
Excessive hum when
daisy-chaining together
multiple systems
TR OUBL ES H O OTI N G
SOLUTION
Turn the volume down on the source. If your audio source volume
can't be adjusted, you can purchase input pads from your local
music retailer.
Try a different source or instrument.
If you're playing audio from a mobile device connected to
the Channel 3 AUX input, make sure that the device isn't also
connected to the USB POWER port for charging. This can create
noise during audio playback.
Make sure the Expanders setting for that channel is set to On, not
Off (see page 75).
Using an AC (mains) outlet tester, test the outlet that the system
is plugged into for any reversed or open (hot, neutral, and/or
ground) contacts.
If the system is plugged into an extension cord, plug the system
directly into the AC (mains) wall outlet instead.
Turn the channel volume down.
Orient the microphone so that it's not pointing directly at
the system.
Try a different microphone.
Try a different position for the system and/or vocalist.
Increase the distance from the microphone to the system.
If using a vocal effects processor, try bypassing it to determine if
the processor settings are contributing to feedback.
Make sure the Expanders setting for that channel is set to On, not
Off (see page 75).
Reduce the volume on the daisy-chained unit(s).
|
7 1
E N G

Publicidad

loading