Hkoenig V24 Manual De Instrucciones página 11

INSTRUCTIONS FOR USE
Check the manufacturer's label on the garment and interpret the
symbol on label as follows:
STEAM IRONING
The appliance uses ordinary tap water.
If the water is very hard (hardness higher than27 degrees French).we
suggest using distilled or demineralized water.
When using the iron for the first lime, iron a plain cloth first.
Before using the appliance, taken down the water tank (14) and fill it,
not exceeding MAX waterline.
When you want
tank base and then push the water tank softly, after hear
means the water tank in the place.
Connecting the appliance and power cord.
Press the switch button (7), power indicator light (6) and steam
available indicator light (8) bright, il means the boiler and iron start
running.
Feed-water from electromagnetism water pump coming down the
boiler when the boiler (13) heating enough.
Choosing the temperature by temperature knob (4), the steam device
indicate ironing area which can be chose (Fig.3).
Around 2 minutes, heating indicator (2) will die out, il means the
appliance can be using the
Steam ironing allowed
For dry ironing, set temperature adjustment knob
Steam ironing allowed
For dry ironing, set temperature adjustment knob (4) on ...
Dry ironing
Check the fabric's resistance to steam ironing or dry iron with
temperature adjustment knob (4) set
Do not iron
Steam ironing or treatment not allowed
to take back the water tank(14),firstly put the
steam.
(4) on ...
on...
water
"click", it