PERIODIC CLEANING OF THE BOILER
• To maintain optimum performance, clean
the boiler every 10/20 uses depending on
the amount of limestone in the water.
• Disconnect the appliance and let it cool
down for at least 2
hours.
• After the appliance refrigeration enough
put up one side of the cleaning valve
(11),
forced to rotate counterclockwise the
cleaning valve (Fig.5) (do not lie fiat the
appliance when you open the cleaning
valve,
otherwise the water will
leakage).
CAUTION! Never attempt to open the
cleaning valve ( 11) while the boiler is
under pressure.
CAUTION: do not pour more than 200ml
water into the boiler. Pour water slowly,
being careful not to let it
overflow,
as this
could damage the
appliance.
• Rinse out the boiler and pour the water
away into the sink or into a container for
collecting dirty
water.