Hkoenig V24 Manual De Instrucciones página 15

• If the water is very
operation until it is clean.
• Checking that the seal is present and that
the cap is screwed on properly.
• Fill the water tank again.
• Turn the appliance on again.
• Before
sink or another container and check that
the steam is clean. This should take a few
seconds.
• Resume ironing normally.
TROUBLESHOOTING
PROBLEM
Water comes out of
the iron instead of
steam
The appliance is on
but it
producing steam
ironing,
The appliance has
not
right
yet.
The
control dial has set
at the minimum.
Water tank is empty
is not or
correctly.
dirty,
release steam into the
CAUSE
reached the
temperature
temperature
not inserted
repeat the
SOLUTION
Wail for the "Steam
Ready" indicator
light and the iron
indicator light to turn
off. lncrease
regulation of
temperature control
dial.
Fill the water tank.
the
the