Descargar Imprimir esta página

Kids II Disney baby Minnie Mouse Blushing Bows Swing 10878-NA Manual De Instrucciones página 18

Publicidad

Utilización del módulo de control de la mecedora
Utilisation du module de commande de la balançoire
Swing Timer Select Button and
Indicator
Botón e indicador de selección de
temporizador de la mecedora
Sélecteur et indicateur de minute-
rie de la balançoire
Low Battery Indicator red
Indicador de batería baja rojo
Indicateur de niveau de piles
faible rouge
Slide the Power Switch to power the Swing Control Module.
EN
The Speed Selector function provides 6 speed settings and OFF. The LEDs
operate sequentially and in bar graph mode. To start the swing function, press
the button until the flashing LED bar graph displays the desired setting. Then
gently push the seat (within 15 seconds) to activate the swing motion. After five
seconds, a single LED will indicate the selected speed.
When you change the speed setting during swing motion, the LED bar graph
will flash for five seconds during the speed adjustment. When the swing timer
expires, the swing stops and the Speed Selector and Timer LEDs turn OFF.
Use the Swing Timer Select function to turn OFF the swing automatically. Press
the button to sequence to the desired timer setting of 30, 45, or 60 minutes.
The three LEDs above the button indicate the selected time period. If you do
not select a timer setting (all LEDs are OFF), the unit uses a default time of 90
minutes for auto-shutoff. To use the swing function after auto-shutoff, either
press the Swing Timer Select Button or the Speed Selector Button.
Press the Nature Sounds/Music Button to begin music and nature sounds
playback. Press as needed to select the desired nature sound or song. Auto-
shutoff occurs after about 20 minutes.
Push the Volume Control Switch as needed to turn off or adjust the volume for
music and nature sounds.
The Low Battery Detection function detects weak batteries and suspends
normal swing operation, music, and nature sounds. The Low Battery Indicator
turns ON (red) when you press a button during this condition. To restore normal
operation, replace all batteries with new alkaline size D batteries.
Using the Swing Control Module
Speed Selector Button
and Indicator
Botón e indicador de
selección de velocidad
Bouton et indicateur du
sélecteur de vitesse
Power Switch
Interruptor de Encendido
Interrupteur de mise en
marche
– 18 –
Volume Control
Switch
Interruptor de control
de volumen
Commande volume
Nature Sounds/Music
Button
Botón de música/
sonidos de la
naturaleza
Bouton Sons de la
nature/Musique

Publicidad

loading