Descargar Imprimir esta página

Kohler K-14660 Guía De Instalación Y Cuidado página 7

Ocultar thumbs Ver también para K-14660:

Publicidad

Installation/Installation/Instalación
7
Apply plumbers putty to underside
of remote valve.
Appliquer du mastic de plombier
au-dessous de la valve à distance.
Aplique masilla de plomería al lado
inferior de la válvula remota.
Insert the remote valve through
the surface material.
Insérer la valve à distance dans
le matériau de la surface.
Inserte la válvula remota a través
del material de la superficie.
8
Position the remote valve with the cold water supply on the
left AND the spout connection toward the front of the lavatory.
Placer la valve à distance avec l'alimentation d'eau froide sur
la gauche ET la connexion du bec vers l'avant du lavabo.
Coloque la válvula remota con el suministro de agua fría a
la izquierda Y la conexión del surtidor hacia el frente
del lavabo.
Spout Connection
Connexion du bec
Conexión del surtidor
Cold Water Supply
Alimentation d'eau froide
Suministro de agua fría
Kohler Co.
9
Partially thread screws
into the ring.
Visser partiellement les
vis sur l'anneau.
Enrosque parcialmente
los tornillos en el anillo.
Hot
Chaud
Caliente
Cold
Froid
Fría
On
Marche
Abrir
7
Remote Valve
Valve à distance
Válvula remota
1/8"
(3 mm)
1123724-2-C

Publicidad

loading