Publicidad
Idiomas disponibles
Idiomas disponibles
4.5 After finishing work
4.5.1 Precautions
Always wash the appliance after using it.
To do that, only start cleaning it when it has come to a
complete stop.
Put all components back to their functional positions before
turning it on again.
4.6 Maintenance
4.6.1 Dangers
Any maintenance with the machine in working situation is
dangerous.
5. Analysis and Problems Solving
5.1 Problem, causes and solutions
This appliance was designed to operate with the need of minimum maintenance but the natural wearing caused by longer
use of the equipment may occasionally cause some malfunctions.
If any problem occurs with your equipment, the most common situations are listed below with recommended solutions.
Besides that, Skymsen has Authorized Technical Assistants that are happy to help. The List of Authorized Technical Assistan-
ts can be checked in the website www.skymsen.com
PROBLEMS
- The appliance does not switch
on.
- Smoke or burnt smell.
- The appliance switch on but
when the product is placed it
stops or the blades turn slowly.
- Damaged cord.
CHART 02
CAUSES
- Lack of electric power.
- Problems in the electrical circuit.
- Problems in the internal and external
electrical circuit.
- Problems with the motor.
- Failure during transport of product.
SWITCH OFF THE APPLIANCE BY PULLING THE PLUG OFF
THE SOCKET DURING MAINTENANCE.
Always disconect the plug from the outlet in case of
emergency.
4.7 Advices
Electrical or mechanical maintenance must be done by qua-
lified personal for such operation.
The person in charge has to be sure that the machine is un-
der TOTAL SAFETY conditions when working.
- Check if plug is connected to its socket
and do as explained in item 3.1 Starting.
- Call technical assistance.
- Call technical assistance.
- Call technical assistance.
- Call technical assistance.
SOLUTIONS
15
Publicidad
