GreenWorks 2105707 Manual Del Operario página 10

Problem Possible Cause
The line The machine is
keeps used incorrectly.
breaking.
The grass Cut tall grass at
winds ground level.
around the
trimmer
head and
motor hous-
ing.
The line The cut-off blade
does not cut becomes dull.
well.
Vibration The line is worn
increases down at one side
obviously. and not advanced
in time.
8 TECHNICAL DATA
Voltage 40 V
No load speed 6300 ±10%min
mer),6800±10%min
Cutting head Bump feed / Brush cutter blade
Cutting line diame- 2 mm
ter
Cutting path diam- 356/406mm (Grass trimmer), 254mm
eter (Brush cutter)
Weight (without 4.5 kg
battery pack)
Battery model G40B2/G40B25/G40B4 and other
BAG series
Charger model G40C and other CAF series
Grass trimmer Measured sound
pressure level
Guaranteed sound
power level
Vibration
English
Solution
1. Cut with the tip of the
line, avoid stones, walls
and other hard objects.
2. Advance the cutting
line regularly to keep full
cutting width.
1. Cut tall grass from the
top down.
2. Remove no more than
8" in each pass to prevent
wrapping.
Sharpen the cut-off blade
with a file or replace it.
Make sure that the line on
both sides is normal. Ad-
vance the line.
-1
(Grass trim-
-1
(Brush cutter)
L =78.4 dB(A),
PA
K = 3 dB(A)
pA
L = 96 dB(A)
WA.d
2
<2.5 m/s , k=1.5
2
m/s
Brush cutter Measured sound
pressure level
Guaranteed sound
power level
Vibration
96 dB. Noise value. (Grass trimmer)
XX
101 dB. Noise value. (Brush cutter)
9 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks website www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Micael Johansson
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
9
L =82.8dB(A),
PA
K= 3 dB(A)
L =101 dB(A)
WA.d
2
<2.5 m/s , k=1.5
2
m/s
String trimmer / Brush cutter
2105707(STF457)
See product rating label
See product rating label
EN