Philips SW6710 Manual Del Usuario página 19

Deactivating the travel lock
Cleaning and maintenance
Cleaning the shaver under the tap
While you activate the travel lock, the
indications on the display light up briefly. When
the travel lock is activated, the travel lock
symbol flashes.
1 Press the on/off button for 3 seconds.
While you deactivate the travel lock, the
indications on the display light up briefly. When
the travel lock is deactivated, the travel lock
symbol flashes and goes out. The shaver
switches on and is now ready for use again.
Note: The shaver unlocks automatically when it is
connected to wall socket.
- Regular cleaning guarantees better shaving
results.
- Never clean, remove or replace the shaving unit
while the shaver is switched on.
- Do not apply pressure to shaving heads.
- Do not touch shaving heads with hard objects
as this may dent or damage the precision-made
slotted guards.
- Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the
appliance.
Clean the shaver after every shave for optimal
performance.
Always check if the water is too hot, to prevent
burning your hands.
19
English