Getting To Know Your Table Saw; Power Switch; Elevation Wheel; Blade Bevel Lock Handle - Bosch GTS1031 Instrucciones De Funcionamiento Y Seguridad

BM 2610014415 01-11 E:BM 2610012089 12-10 E 1/10/11 7:17 AM Page 9

1. pOWER SWITCH

Switch incorporates hole for use with padlock to pre-
vent accidental starting.

2. ElEVATION WHEEl

Elevates or lowers the blade. Also used to tilt the
blade 0 to 45 degrees.

3. blAdE bEVEl lOCK HANdlE

Locks the blade to desired bevel angle.

4. blAdE bEVEl SCAlE

Shows the degree the blade is tilted.

5. bASE

Supports table saw. Holes are provided in base to
bolt the saw to a workbench or stand. Includes inte-
grated carry and adjustment handles

6. TAblE EXTENSION lOCK HANdlE

Allows you to lock the table extension at desired dis-
tances. Also prevents use of table saw with un-
locked extension.

7. pUSH STICK

Allows you to rip smaller pieces of stock with a
greater level of safety.
FIG. 1
14
15

getting To Know your Table Saw

11
12
13
1 2
-9-

8. TAblE EXTENSION

Provides a larger work surface for wider workpieces.

9. RIp fENCE

Exclusive Self-Aligning, Squarelock rip fence can be
easily moved or locked in place by simply raising or
lowering lock handle.

10. RIp fENCE SCAlE

Shows the distance from the blade to rip fence
through a convenient viewing and magnifying win-
dow. Lower portion of scale can be used up to 10
inches. Upper portion of scale is used for cuts be-
yond 10 inches.

11. SMART gUARd SySTEM

Consists of three key elements: Adjustable (3 posi-
tion) Riving Knife, Anti-Kickback Device, and Barrier
Guard Device. All of these are part of a modular sys-
tem that requires no tools to assemble or unassem-
ble. This Guard System must always be in place and
working properly for all thru-sawing cuts.

12. TAblE INSERT

Removable for removing or installing blade or other
cutting tools.
10
3 24 4
8
9
7
6
5