This User Manual has been translated for your convenience using machine translation.
Reasonable efforts have been made to provide an accurate translation; however, no
automated translation is perfect nor is it intended to replace human translators. The
official User Manual is the English version. Any discrepancies or differences created in
the translation are not binding and have no legal effect for compliance or enforcement
purposes. If any questions arise related to the accuracy of the information contained in
the User Manual, please refer to the English version of those contents which is the
official version.
Technical data
Description of the
parameter
Product name
Model
Supply voltage [V~] /
Frequency [Hz]
Rated power [W].
Protection class
IP protection rating
Dimensions [Width x Depth x
Height; mm]
Weight [kg]
Permissible thickness of a
reinforcing bar [mm]
Single bending time [s]
Bending angle [
Minimum length of a
bent/straightened bar [cm]
Work cycle
Recommended hydraulic fluid
(oil)
1. General Description
This manual is intended to assist you for safe and reliable use. The product is designed
and manufactured strictly according to technical specifications using the latest
technology and components and maintaining the highest quality standards.
o
]
Value of the
parameter
REBAR BENDER
MSW-RC-280
800 x 230 x 320
S2 - 10 min. work / 10 min. breaks or after 60-70
HM 46 for hydraulic pumps
(with antioxidants, anti-corrosive and anti-wear
additives but without cleaning substances)
230 / 50
1250
I
IPX0
20
16-28
5-6
0-90
20 / 30
cycles.